Power Monitoring…Site Power Monitor

Remote Monitoring Of Critical Site Conditions

Sensor Data

DC Bus/Battery Voltage
DC System Amperage/Battery Charge-Discharge Current
AC Voltage
Ambient Temperature
Dry Contacts/Alarms

Firmware

Programmable Alarms
Data Logging
Ethernet Camera

Reporting Via

Internet – Software Included
E-Mail
Cell Phone

DESCRIPTION
SPECIFICATIONS
DOWNLOADS

Web-enable and integrate intelligence to any site’s AC and DC power system for 24/7 monitoring, alarm condition notification, and data logging of vital electrical functions. All programmable, accessible, and managed via the Internet: TCIP or SNMP. View current conditions and log 30 day history of DC and AC power status at remote sites before dispatching personnel. The Site Power Monitor is designed specifically for monitoring power supplies, rectifiers, batteries, converters, inverters, UPS, distribution panels, and AC power at communication sites, base stations, outdoor enclosures, and command vehicles via Ethernet or Wireless connection. The palm sized unit can be rack, DIN-rail, or wall mounted and is easily adapted to virtually any make of power system via nine sensor input ports which capture and stream critical data via the internet for analysis and logging of site history. Web page based programs are easily user configured for site parameters with up to 50 desired alarm conditions settings and multiple automatic notification options by e-mail, PDA, and mobile phone. Sites without internet access can use the monitor solely as a data logger that captures and retains 30 days’ data, ready for download to lap top for site history file and analysis of component performance and failure conditions.

Sensor Input Examples 9 Ports Available, See Complete List Below

Monitoring Options

Mounting options:

Wall mount
DIN-rail
19 or 23 inch rack mount (via optional bracket)

Inputs

Power Source Voltage: 9-60 negative/positive ground, 250 mA max. Monitor Inputs: 9 Total Voltage: DC: 3 Ports:

2 each: 0-40 VDC
1 each: 36-60 VDC
Accuracy: +/- 2%

AC: 2 Ports:

120/240 ( 90-264) utility power (L-N or L-L)
120/240 inverter output (floating)
Accuracy: +/-2%

DC Current: 1 Port

+/- 100mv, 100 amp differential shunt voltage
Read battery charge/discharge current, or load current
Optional Shunt required for monitor package: P/N 575-2000-0
Accuracy: +/-3%

Dry Contact Switch Sensors: 3 Ports

Possible uses: door open, water leak detection, smoke alarm, component fail, breaker trip, high temperature Temperature Sensor
Located outside case of unit
Range: -40 to +60° C, -40° to +140° F
Accuracy: +/-0.5° C

Reporting

Ethernet Port connection: RJ-45, 10/100 autosense
HTTP – Web Access, Self-generated Web-page
SNMP – MIB with Gets, Traps, and Clears
Alarms – HIGH and LOW trip, 50 max, user-programmable
Logging – Excel logs created, time stamped, continuous graphing
SMTP/POP3 – email alerts, POP password
Data Formats: XML, PDA, WAP (cell phone)
Optional Console – Multiple Site Monitor with log aggregation and thumbnail camera views
Remote Firmware upgrades – no need to visit the site.
Local Data downloading and programming require and RJ-45 cross over cable (not included)

Data Screens: