DC Converters
Select an item from the list below:
DC Converters
Convert 20-50 VDC input to 12 or 24 VDC negative ground output for powering communication/navigation equipment, on negative ground systems. (see Isolated series for positive ground applications.) Ideal for powering voice and data transceivers in mobile applications.
Isolated & Spike Protected Series
Isolated and Spike protected series converters offer the benefits of an isolated converter plus protection against line transients and voltage spikes typically caused by large DC motors and switching transients often encountered on forklifts, locomotives and light rail applications. A transient energy circuit clamps input spikes to a safe level, protecting both the converter and the powered equipment. Rugged case construction and internal components designed for severe vibration applications.
This series provides voltage conversion as well as input/output isolation, allowing use of negative ground electronics on off-highway vehicles which typically employ positive ground battery systems. May also be used as a voltage stabilizer and filter for sensitive equipment.
Communication sites require isolated DC Converters to provide excellent voltage regulation, low noise, and high efficiency voltage conversion. Reliability is vital under continuous duty operation and high ambient temperatures.
These units accept a wide input range at 24 or 48 VDC nominal, positive or negative ground, and produce pure 12, 24, or 48 volt power. The solid state circuitry is conservatively designed and semi-conductors are selected and tested to withstand 200% of normal operating power.
Feed sensitive electronics with proper voltage regardless of battery condition. These stabilizing converters provide continuous, precisely regulated output over the entire range of a battery’s usable voltage. This prevents subjecting loads to fluctuating input voltage which can cause shutdown, diminish performance and possibly damage sensitive circuitry.
Single output, n+1 redundant, Galvanic Isolated, The Plug and Play Solution, The direct way to your System Solution, Input voltage 12 – 220 V, Output Voltage 12…220VDC, Output power 20W…1200W, Operating modes: Parallel operation, N+1 redundant operation
Power (W) 20W – 50W, Input Voltage (VDC) 24 – 110VDC, Output Voltage (VDC) 5 – 24VDC 2×12 -2x15VDC, Number of Outputs 1,2, Case Style 19″ Euro Cards, Single Units / Modules, System solutions, redundant Systems
Rack Plug-in DC Converters
Single Output, Galvanic Isolated, Input voltage 12 – 220V, Voltage regulated, High efficiency, High industrial standard, Intended for 19″ rack and Stand-alone use
Single Output, Galvanic separated, Input voltage 16.8 – 143VDC, Output power 100 Watt, DC/DC Converter for wall- or DIN-rail-mounting and for 19″-rack systems, Voltage regulated, For parallel and n+1 redundant operation, In a rugged case, Optional configured for rail applications and fixed for shock
Single Voltage, Galvanic Isolated, input voltage 16.8 – 162.5 VDC, Output power 500 Wattt, Galvanic isolated input and output, Powerful compact DC/DC converter for all kinds of industrial and automotive applications, DC/DC – converter for wall and DIN-rail mounting and 19″ rack mounting, Voltage regulated, For parallel and n+1 redundant operation, Fixed in a robust case
Digital DSP-controlled DC / DC Converter, Digital Serial Interface, Power 500 watts, Galvanic isolated input and output, For parallel and n +1 redundant operation with current share, Temperature controlled fan, Programmable output voltage, Programmable output current limit, Digital serial interface EIA485 (RS485), galvanic isolated, Fieldbus connection, Flexible configurable, Sense connection
Single Output, Galvanic Isolated, Input voltage 24 – 220V, Output power up to 1800 W, Voltage regulated, High efficiency, Up to 15 units to be connected in parallel with current sharing, For 5xGWL 1 fan chassis or forced cooling necessary, Option: For ruggedized applications, Additional available operational modes: parallel and n + 1 redundant
Single Output, Galvanic Isolated, Input voltage 24 – 220V, Output power 200 W, Voltage regulated, High efficiency, Intended for 19″rack and standalone use, Additional available operational modes: parallel and n + 1 redundant, Up to 6 units to be connected in parallel with current sharing, Option: For ruggedized applications
Single Output, Galvanic Isolated, Input voltage 12 – 220V, Voltage regulated, Power boost with GWP-Card, High efficiency, High industrial standard, Intended for 19″ rack
