DIN-UPS 12V, 24V and 48Volt
Powers Loads, Charges and Monitors Back-Up Battery, Ideal
for Wireless System Transmitter/Enclosure Applications
- Combines all system power functions: power supply, battery charger, UPS circuitry and status monitoring in ONE compact DIN rail mount unit
- Dual outputs for load and battery:
- “Load priority” output distribution ensures power is dedicated first to the load, with remainder then allocated to battery charging, thus preventing a discharged battery from impacting operation of critical loads.
- 3 step charging for rapid battery recovery, programmable for battery type, with optional temperature compensation sensor
- Battery automatically supports load anytime AC fails
- Low voltage disconnect protects battery from total discharge
- Automatic periodic battery health diagnosis
- High operating temperature range to 70 degrees C
- Alarm contacts: AC fail, battery at risk
Front Panel LED Indicators:
- Power Source: AC or on back up
- Battery and System Diagnostics (via blink code)
Settings/Selectors:
Battery Type: AGM, Sealed Lead Acid, Gel-Cell
Battery Charge Current Limit: 20 – 100% of charge amperage rating
Back-Up Run Time on Batteries:
- Programmed time limit: 1 – 60 min. (48-10 model only)
Or - Until LVD disconnect (all models)
Power Restore Button: connects battery without AC present
Signal Outputs (form C):
- On backup power
- Battery abnormal condition (summary contact): Discharged, damaged, disconnected, sulfated/ short circuit, reverse polarity, bad thermal sensor
Temperature: -25 to +70˚ C. Continuous to 50˚, de-rate 2.5% per ˚ C >50˚ C
Cooling: Free air, convection
Efficiency: 91%
Protection:
- Low Voltage disconnect at 1.5 volts per cell
- Internal fuse
- Current limiting
- Short circuit
- Reverse polarity
- Thermal overload shut down and recovery
- IP 20
- Designed to UL 1950
Terminal Blocks: Screw type
Mounting: DIN Rail Bracket (35mm)
Optional: Battery temperature compensation probe
| Model | Input VAC | Output | Dimensions | Weight | |
| Voltage | Power | (H x W x D) | |||
| DIN-UPS 12-10 | 115/230 | 12 VDC | 10 Amps | 4.5″ x 2.6″ x 5.3″ | 2 Lbs. |
| DIN-UPS 24-10 | 115/230 | 24 VDC | 10 Amps | 4.5″ x 3.9″ x 5.3″ | 2 Lbs. |
| DIN-UPS 48-10 | 115/230 | 48 VDC | 10 Amps | 4.5″ x 5.9″ x 5.3″ | 4 Lbs. |
