INVERTERS - RACKMOUNT
500 - 5000Watt
19” / 23” 3U
Pure Sine Wave
12V, 24V, 36V, 48V,
72V, 96V or 120VDC
230VAC Standard 110VAC Optional
The pure sine wave IRM Series inverters
are the most versatile and
customisable inverter range. A professional 19” rack
enclosure with a wide range of options to suit individual applications
sine wave waveform
Massive inrush and overload capacity
Designed and manufactured in Australia
circuit breaker / battery isolator switch
efficiency toroidal transformer
Rack Mount Design
A rack mount design allows flexibility and
ease of installation. A true sine wave output with excellent surge power
capacity enables the operation of demanding appliances, such as fridges,
microwaves, washing machines and pumps.
Pure Sine wave Waveform
Pure sine wave output provides the ideal
power source for modern electronics. Short-circuit proof with robust design
that protects itself against AC shorts. LS Series Stand-alone inverters are
backed by our 3 year manufacturer’s warranty.
Sophisticated circuitry provides protection
against overload, short circuit, over temperature and battery low voltage
Fully selectable between 50/60Hz via a set of internal dip
switches for international use.
Auto-start circuitry automatically switches
the inverter ON and OFF with applied appliances. The auto-start is an
important feature as it maximises valuable battery capacity.
the auto-start can be easily adjusted to either start small appliances or
High Efficiency Toroidal
Toroidal transformers provide outstanding
efficiency and durability. When sized correctly, high surge rating allows
easy starting of motors and high inrush current devices.
DC Circuit Breaker /
Battery Isolator Switch
DC Circuit Breaker protects the inverter
and cables from becoming a potential fire hazard under fault conditions, as
well as providing a point of isolation from your batteries while switched OFF.
circuit breaker is designed for ease of operation and safety. If the
Inverter shuts down due to Overload, Undervolts or Overvolts it can be
Full 3500V AC/DC isolation.
High quality, high current, heavy duty DC leads for low loss power delivery.
Power indicator (green LED). This LED
flashes when in Standby mode (i.e. no loads connected). When a load is
applied the LED will illuminate continuously to indicate that 230VAC is
When the inverter is switched on all 3 LED
lights light up for 1 second while the microprocessor performs a start up
and system check procedure.
A large range of options from custom
voltages and alarm contacts to vibration proofing and conformal coatings are
Massive inrush and Overload capability.
Input voltage: 12, 24, 36,
48, 72, 96 & 120
Input voltage range: -20% to +45% of nominal
Output waveform: True sinewave <4% THD
Output voltage: 230V +/- 4% standard
110V +/- 4% option
Output frequency: 50/60Hz +/- 0.1%
Crest factor: >4
Overload capacity: 300% 5 seconds (all models)
120% 30 minutes (110% 12V models)
Operating temperature: -10˚C to +50˚C (can be extended)
Cooling: Thermostatically controlled fan
Power factor: All conditions
Peak efficiency: 90% to 94% model dependent
DC connections: Heavy duty low loss battery leads
AC connections: Screw terminal junction box
Standards: AS2279, AS3000, AS3100, EN55014 & C-Tick
Protection circuitry: Full electronic protection against
overload, over-temperature, short circuit, battery over and under voltage
Dimensions: 483mm wide x 382mm deep x 132mm high